Choosing the Device to Notify

Choosing the Device to Notify

Choosing the Device to Notify 

 

Step 1

In the Message Notification menu, press one of the following numbers to select the device to notify:  

  • 1—Pager   
  • 2—Home phone  
  • 3—Work phone  
  • 4—Cell phone14

 

Step 2

After selecting the device you want to configure, you can select the following actions by number: 



Option


Description

 

1  

 

Enable message notification (if off) or disable message notification (if on).   
 


2

 

Hear current notification settings.


3


Change the notification phone number (the number of your phone or pager). Cisco Unity Express dials this number to send notification of newly-received voice-mail messages. See the “Changing the Notification Phone Number” section.
  


4


Listen to the current notification schedule. Configure the time of day you want to receive notifications; for example, you may want to turn off notifications during the evening. See the “Configuring the Notification Schedule” section.
  


5


Change notification preferences (have notifications sent for all messages, or urgent messages only). See the “Changing Notification Preferences” section.

 


    • Related Articles

    • What are Device Configuration Menu and submenus ?

      Device Configuration Menu The Device Configuration menu provides access to eight submenus from which you can view a variety of settings that are specified in the configuration file for a phone. The phone downloads the configuration file from the TFTP ...

    • Set Device Authentication Field

      Set Device Authentication Field   Procedure Step 1   Choose Settings > Security Configuration > 802.1X Authentication > Device Authentication. Step 2   Set the Device Authentication option to Enabled or Disabled. Step 3   Press Save.

    • External Device Use

      External Device Use   Cisco recommends the use of good quality external devices, such as speakers, microphones, and headsets that are shielded (screened) against unwanted radio frequency (RF) and audio frequency (AF) signals.   Depending on the ...

    • Enable Device Invoked Recording

      Enable Device Invoked Recording Configure the Device Invoked Recording feature from Cisco Unified Communications Manager Administration. For more information and detailed instructions, see the “Monitoring and Recording” chapter in the Cisco Unified ...

    • Device_Configuration_Guide (BCM 4.0)

      Device_Configuration_Guide (BCM 4.0) Note: You will need Adobe Reader to view PDF documents.