What are the technical specifications of the Cisco 837 router?
What are the technical specifications of the Cisco 837 router?
The technical specifications of the Cisco 837 router are as follows:
Feature |
Specifications |
Processor |
Motorola RISC |
Default DRAM1memory |
32 MB |
Maximum DRAM memory |
48 MB |
Default Flash1memory |
12 MB |
Maximum Flash memory |
24 MB |
WAN |
ADSL over POTS—Annex A. |
LAN |
Four-port 10/100BASE-T with autosensing MDI/MDX for autocrossover. |
Console port |
This port can be configured to behave as an auxiliary port (virtual AUX supports modem control for dial backup and out-of-band management). |
LEDs |
10 |
External power supply |
Universal 100-240 VAC. |
Safety |
- UL 1950/CSA 950-95: Third Edition
- IEC 950: Second Edition with Amendments 1, 2, 3, and 4
- EN60950: 1992 with Amendments 1, 2, 3, and 4
- CS-03, Canadian Telecom Requirements
- FCC Part 68 U.S. Telecom Requirements
- AS/NZS 3260: 1996 with Amendments 1, 2, 3, and 4
- ETSI 300-047
- TS 001 with Amendment 1
- EMI
- AS/NRZ 3548: 1992 Class B
- CFR 47 Part 15 Class B
- EN60555-2 Class B
- EN55022 Class B
- VCCI Class II
- ICES-003, Issue 2, Class B, April 1997S
- IEC 1000-3-2
|
Immunity |
- IEC 1000-4-2 (EN61000-4-2)
- IEC 1000-4-3 (ENV50140)
- IEC 1000-4-4 (EN61000-4-4)
|
ADSL |
ST-Micro DynaMiTe (formerly Alcatel Micro Electronics) ADSL Chipset (20150):
- T1.413 ANSI ADSL DMT issue 2
- G.992.1 ITU G.DMT support
- G.992.2 ITU G.Lite support
- G.992.3 ITU G.hs ADSL type negotiation
The chipset does not provide interoperability with carrierless amplitude modulation/phase modulation (CAP)-based ADSL lines.
|
Physical specifications |
- Dimensions (H xWx D): 2.0 x 9.7 x 8.5 in. (5.1 x 24.6 x 21.6 cm)
- Weight: 1.48/1.5 lb (0.67/0.68 kg)
|
Environmental operating ranges |
- Nonoperating temperature: -4 to 149 F (-20 to 65 C)
- Nonoperating humidity: 5 to 95%, relative humidity (noncondensing)
- Nonoperating altitude: 0 to 15,000 ft (0 to 4,570 m)
- Operating temperature: 32 to 104 F (0 to 40 C)
- Operating humidity: 10 to 85%, relative humidity (noncondensing)
- Operating altitude: 0 to 10,000 ft (0 to 3,000 m)
|
Power ratings |
- AC input voltage: 100 to 250 VAC, 50 to 60 Hz
- Power consumption: 6 to 10W (idle-maximum consumption)
- Power supply rating: 15
|
1 DRAM and Flash memory must be obtained from Cisco.