Status Messages Screen
The Status Messages screen displays the 10 most recent status messages that the phone has generated. You can access this screen at any time, even if the phone has not finished starting up. Status Messages describes the status messages that might appear. This table also includes actions you can take to address errors.
Display Status Messages Screen
To display the Status Messages screen, follow these steps:
Procedure
Step 1 Press Settings.
Step 2 Select Status.
Step 3 Select Status Messages.
Step 4 To remove current status messages, press Clear.
Step 5 To exit the Status Messages screen, press Exit.
Related Articles
Status Messages
Status Messages Status Messages on the Cisco Unified IP Phone Message Description Possible Explanation and Action BootP server used The phone obtained its IP address from a BootP server rather than a DHCP server. None. This message is ...
How to use Model Information, Status, and Statistics menu on the Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G-GE, and 7962G to view model information, status messages, and network statistics for the phone ?
Model Information, Status, and Statistics Overview This chapter describes how to use the following menus on the Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G-GE, and 7962G to view model information, status messages, and network statistics for ...
What are the options of Status Menu ?
Status Menu The Status menu includes theses options, which provide information about the phone and its operation: Status Messages: Displays the Status Messages screen, which shows a log of important system messages. Network Statistics: Displays the ...
Model Information, Status, and Statistics
Model Information, Status, and Statistics Model Information, Status, and Statistics Overview Display Model Information Screen Status Menu Test Tone
Expansion Module Status Fields
Expansion Module Status Fields Item Description Link State Overall expansion module status RX Discarded Bytes Number of bytes discarded due to errors RX Length Err Number of packets discarded due to improper length RX Checksum Err ...