Set EAP-MD5 Shared Secret Field

Set EAP-MD5 Shared Secret Field

Set EAP-MD5 Shared Secret Field

 

See Cisco Unified IP Phone Security Problems, for recovery of a deleted shared secret.

 

Procedure

Step 1  Choose EAP-MD5 > Shared Secret.

Step 2  Enter the shared secret.

Step 3  Press Save.

    • Related Articles

    • Factory Reset of Phone has Deleted 802.1X Shared Secret

      Factory Reset of Phone has Deleted 802.1X Shared Secret   Problem After a reset, the phone does not authenticate.   Cause These errors typically indicate that the phone has completed a factory reset while 802.1X was enabled. A factory reset deletes ...

    • Set Device Authentication Field

      Set Device Authentication Field   Procedure Step 1   Choose Settings > Security Configuration > 802.1X Authentication > Device Authentication. Step 2   Set the Device Authentication option to Enabled or Disabled. Step 3   Press Save.

    • Set IP Address Field

      Set IP Address Field Procedure Step 1 Unlock network configuration options. Step 2 Set the DHCP option to No. Step 3 Scroll to the IP Address option, press Edit and enter a new IP Address. Step 4 Press Validate and Save.

    • Set IPv6 Address Field

      Set IPv6 Address Field Procedure Step 1 Unlock network configuration options. Step 2 Set the DHCPv6 option to No. Step 3 Scroll to the IP Address option, press Edit, and then enter a new IP Address. Step 4 Press Validate and then press Save.

    • Set Alternate TFTP Field

      Set Alternate TFTP Field Procedure Step 1 Unlock network configuration options. Step 2 Scroll to the Alternate TFTP option and press Yes if the phone should use an alternative TFTP server. Step 3 Press Save.