Product-Specific Parameters
Cisco Unified Communications Manager Administration allows
you to set some product specific configuration parameters for Cisco Unified IP
Phones. The following table lists the configuration windows and path in Cisco Unified
Communications Manager Administration.
|
Configuration
window
|
Path
|
|
Enterprise Phone Configuration window
|
System
>
Enterprise Phone Configuration
|
|
Common
Phone Profile window
|
Device
>
Device Settings > Common Phone Profile
|
|
Phone
Configuration window
|
Device > Phone; Product Specific Configuration area of
window
|
You can set the following parameters in any of the three
configuration windows:
-
Settings
Access
-
Video
Capabilities
-
Web
Access
-
Load
Server
-
RTCP
-
Peer
Firmware Sharing
-
Cisco
Discovery Protocol (CDP): Switch Port
-
Cisco
Discovery Protocol (CDP): PC Port
-
Link
Layer Discovery Protocol - Media Endpoint Discover (LLDP-MED): Switch Port
-
Link
Layer Discovery Protocol (LLDP): PC Port
-
IPv6 Load
Server
-
802.1x
Authentication
-
Switch
Port Remote Configuration
-
PC Port
Remote Configuration
-
Automatic
Port Synchronization
-
SSH
Access
When you set the parameters, select the Override
Common Settings check box for each setting you wish to update. If you do not
check this box, the corresponding parameter setting does not take effect. If
you set the parameters at the three configuration windows, the setting takes
precedence in the following order:
-
Phone Configuration window (highest precedence)
-
Common Phone Profile Configuration window
-
Enterprise Phone Configuration window (lowest
precedence)